Blog - Sinutech

06/2020

Do you need to improve surface adhesion for bonding?

Bonding applications may show poor adhesion because of low surface energy of the substrate, lack of bonding sites or the presence of contaminants. Therefore, materials properties and substrate chemistry and conditions need to be taken into account. Such cases require a pre-treatment process to increase the surface energy, and provide optimal conditions to ensure good [...]

03/2020

Feeding high viscosity materials from the original containers

We present here the A220 and A280 solutions for automated fluid dispensing operations. These are solutions developed for feeding high-viscosity and / or abrasive materials, both mono-component and two-component, commonly used in sealing, potting or thermal conduction applications. These materials are generally supplied in standard drums and require a resistant and reliable feeding process. Only [...]

04/2019

Dispensing solutions for electro mobility

The automotive industry is currently facing the great challenge brought about by the vehicle of the future: emission-free, completely autonomous and networked with the whole world. Electronics is the main driving force behind innovation in this context. Whether it is battery technology and e-drive, sensor technology, connectivity or artificial intelligence, without highly functional and compact [...]

11/2018

Participation in Matelec Industry 2018

From November 13th to 16th we exhibited in the new edition of Matelec Industry 2018, the International Trade Show for Industrial Technology and Smart Factory, at IFEMA in Madrid. We showed different industrial solutions for automated dispensing, adhesive, encapsulation, application of thermal conductive liquid materials, and cleaning and activation of surfaces with atmospheric plasma. As [...]

02/2018

Do you need to dispense Thermal Interface Materials for heat dissipation?

The growing trend towards the development of ever smaller components, more efficiency and higher performance leads to products with a higher heat generation and less surface area available to dissipate it. Removal of this excess energy becomes critical and more and more solutions for effective thermal management are required to guarantee products operational lifetime and [...]

10/2017

Participation in EXPOQUIMIA 2017

From October 2nd to 6th we took part in the new edition of EXPOQUIMIA 2017, the International Chemistry Event held in Gran Via Exhibition Centre, Fira de Barcelona. We exhibited different industrial solutions for automated fluid dispensing operations, adhesive bonding, potting, application of thermo conductive liquid materials, and cleaning and activation of surfaces by atmospheric [...]

07/2017

Participation in the Technical Days of Stäubli Española

On May 10th and 11th we participated in the Technical Days that Stäubli Española, SAU organized on the occasion of the 125th anniversary of the Group. We showed examples of the use of robotics in dispensing applications such as adhesion, sealing and encapsulation, either from systems with volumetric metering and dispensing heads, or with needle, [...]

03/2017

Do you need to dispense UV cure adhesives in an automated and repetitive way?

The use of UV adhesives, which cure by activation with UV light, shows a growing trend in the medical, electronic and glass bonding industries, due to excellent chemical structure and inherent properties. The most common adhesives are one-component materials based on silicones, epoxies and acrylates, the latter being the preferred option because of faster curing, [...]

11/2016

Participation in Matelec Industry 2016

From October 25th to 28th we exhibited in the new edition of Matelec Industry 2016, at IFEMA in Madrid. Different industrial solutions for automated fluid dispensing operations were exhibited: Volumetric metering head Dos P from Scheugenpflug, designed and optimized to apply thermal conductive materials, 1C or 2C, highly viscous and abrasive, combining speed and accuracy. [...]

09/2016

Do you use cyanoacrylate and want to dispense it regularly and accurately, with a rational use?

Cyanoacrylate is a mono component adhesive used for quick bonding of materials since it cures rapidly upon exposure to moisture in the air. It is usually applied manually from the supplying container, though for usual industrial applications, the manual system does not allow to control the dispensed amount of material, thus entailing a lack of [...]