Syringes
Material: Polypropylene
Volume: 3 / 5 / 10 / 30 / 50 / 70 mL
Others: Operating Pressure: 0 – 690 kPa; also available for UV adhesives
Cartridges
Material: Polyethylene or stainless steel
Volume: 170 / 340 mL
Plungers
Material: Polyethylene
Others: To use in syringes or cartridges with high viscosity materials. For syringes, there are also plungers for low viscosity materials, and their use avoids the use of vacuum
Needle adapters
Material: Brass, polyacetal, teflon
Others: To set needles to valves, cartridges or syringes
Standard needles
Needle material: Stainless steel
Needle base material: Brass, Ni-coating
Needle length: 13 mm
Øint: 0,18 – 2,16 mm
Øext: 0,36 – 2,76 mm
PTFE needles
Needle material:PTFE
Needle base material: Polypropylene
Needle length: 25 mm
Øint: 0,20 – 1,60 mm
Others: Usable when metal needles cannot be used; for anaerobic and cyano-containing materials
PTFE needles (UV)
Needle material: PTFE
Needle base material: Polypropylene
Needle length: 25 mm
Øint: 0,20 – 0,50 mm
Others: Optimal for UV curing adhesive materials
Twin needles
Needle material: Stainless steel
Needle base material: Brass, Ni-coating
Needle length: 20 mm
Øint: 0,34 – 0,84 mm
Øext: 0,64 – 1,26 mm
Pitch between needles: 2,5 mm
Multi needles
Needle material: Stainless steel
Needle base material: Brass, Ni-coating
Needle length: 3 – 100 mm
Pitch between needles: Ø2,7 – 0,2 mm | Ø3 – 0,2 mm
Shower needles
Needle material: Stainless steel
Needle base material: SUS304
Needle length: As required
External diameter needle base: Ø 10, 15, 20, 25, 30, 35, 40 mm
Plastic needles
Needle material: Stainless steel
Needle base material: Polypropylene
Needle length: 13 mm
Øint: 0,10 – 1,50 mm
Øext: 0,26 – 1,82 mm
Bent needles
Needle material: Stainless steel
Needle base material: Polypropylene
Øint: 0,16 – 1,50 mm
Øext: 0,31 – 1,82 mm
Others: Suitable for manual operations
Precision nozzles
Material: Stainless steel
Length: 18 mm
Øint: 0,10 – 0,50 mm
Others: For accurate control of small doses
Taper nozzles
Material: Polyethylene
Length: 32 mm
Øint: 0,28 – 1,50 mm
Others: Inner taper shape achieves smooth dispensing with double thread
Plastic nozzles
Material: Polyethylene
Length: 63, 100, 152 mm
Øint: 0,80 – 3,20 mm
Others: To insert directly to the cartridges
